With this charger you can get your batteries charged faster by charging 2 packs at a time. It will charge the majority of batteries that are used in today's high and low end electric RC's.-

The operating program in this charger is executed with mutual links and communicates with every component to prevent any possible error, so it introduces the maximum safety possible. Especially, the charging algorithm is so multifarious that you can select the best program to suit your requirement. The BC8DX has a large LCD for showing various information including charge/discharge graphs during the charging process.

The BC8DX employs the circuit that features two totally independent but identical high-power outputs which are powered as much as 160watts each. As a result, it can charge or discharge up to 44 cells of NiCd/NiMH or 16 series of Lithium batteries simultaneously. Furthermore, the twin-fan cooling system is so efficient that can hold such a power without any trouble of ruining the circuitry.

The BC8DX has individual cell voltage balancers at both outputs, So you do not need any separate balancer when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.

The BC8DX also can monitor and balance individual cells of the Lithium battery pack during the discharge process as well as ‘FAST’ and ‘STORAGE’ mode. If the voltage of any one cell varies abnormally, the process will be stopped with an error message.

The BC8DX can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.

For Maximum safety the automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)

Auto-charge current limit: When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.

Capacity limit: The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.

Temperature limit: The temperature of the battery on charging or discharging will be raised by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has been reached.

Processing time limit: You can also restrain the maximum processing time to prevent any possible defect.  

-Two High-Power OUTPUTs (2 x 160W/25W)

-Large LCD (128 x 64 dots)

-Max 9A charge / 5A discharge per side

-Integrated 8S-Balancer at both outputs

-Intelligent Double cooling fans

-New PC software (USB link) capable

-NiCd/MH 1-22Cells per output

-Lilo,LiPo,LiFe 1-8 series per output

-Pb 2~ 28V per output

-No. of Cycles - Up to 10 times

-Battery Capacity 100 ~ 65000mAh

-Battery data memory - Up to 5 pack per battery-type

$260.00